The XG4780 series is a self-contained LTE Cat M1 modem with an integrated GPS engine, cellular antennas, accelerometer, motion detector, and 5000 mAh internal rechargeable battery. The XG4780 series features a unique power management algorithm, which consumes less than 2mA at 12V in sleep mode yet still capable of periodic reporting of health, status, and location of remote assets. With multiple input/output ports and proven embedded application, the XG4780 series is ideal for monitoring and control of high-value remote assets where input power availability is vital. The XG4780 series has been designed with the latest GPS technology allowing GPS tracking under extreme conditions where most other competing products fail. The weatherproof case (meets IEC 68-2-27 environmental standard and is IP66 certified) allows the XG4780 to be used in a myriad of applications.

Available versions:





General specification

HW opt1: RS232, RS485
HW opt2: RS485, CAN
BLE 5.0 (optional)


2x digital (frequency, impulse counter,
I/O modes),
2x analog, 12 bit, 0-31V.

(combination of max 2 inputs/outputs to be used)


2x digital (-),
1x +12V (50mA)
(combination of max 2 inputs/outputs to be used)

Power supply

External power supply 8-31V
Consumption at 12V:
active without a load on output: 40mA,
active with a maximum load on output: 1000 mA,
deep sleep: 2,5 mA external power,
deep sleep: 0,2 mA internal battery,
registration of power cut-off to device
event log,
internal battery 5000 mAh.

Internal memory

8 MB, up to 150 000 entries


3-axis, digital

Internal odometer


Operational temperature

From -20 to +60 C°


130.3 x 69.1 x 40.9 mm


Internal antenna

Detection of GSM jamming



Internal high gain antenna


-157 dBm


Cold <30 s, hot 1 s. A-GPS support

Try Xirgo Global system demo version- for free!


Bluetooth extender

Bluetooth extender - universal device for various bluetooth applications. This small adapter will be compatible with different hardware versions of Xirgo GNSS equipment and will enable them to support wireless sensors, such as fuel level sensors, angle measurement sensors, temperature & humidity sensors, door sensors and more. Besides that, it will extend our hardware functionality engaging new mobile applications (future releases).

Read more

IP67 Protective case

IP67 Tough protection case against harsh weather conditions. Made from ABS plastic with UV protection. Works in low and high temperatures and certified for IP67 ingress ratio. A build-in breathing valve lets out humidity which appears during temperature change and saves internal components from oxidation. Universal for all FMS500/XG3700 series

Read more

OBD Extension Cable

OBD extension cables make FMS500/XG3700 series devices installation as easy as possible, just plug and play. No extra tools or wiring required

Read more

13.56MHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.
Read more

13.56MHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with Mifare 13.56MHz keys cards.
Read more

125kHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.
Read more

125kHz RFID key fob

Key fob is affordable proximity RFID key fob for using in access control systems.
Read more

125kHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with 125KHz key fobs and 125KHz cards.
Read more

Magnetic iButton key

iButton key devices are small, durably and easy to care. Magnet which is under the chip lets connect key to reader and it stays there all the time. It lets to make more scenarios for identification.
Read more

iButton key

iButton key devices are small, durably and easy to care. The iButton serial number is a rugged data carrier that serves as an electronic registration number for automatic identification.
Read more

ID Reader

The driver is expected to touch the iButton to the reader to start engine or identify himself. Reader can shine in RGB colors, LED is inside.
Read more

Concrete mixer rotation magnetic sensor

Magnetic Sensor adopts hall effect when the magnetic buttons go through the front end of the Magnetic Sensor, and thus causing the magnetic field changes.
Read more

Door sensor

Mechanical or magentic sensors are used to identify vehicle door open/close operations.
Read more

Seat sensor

A load cell (or loadcell) is a transducer which converts force into a measurable electrical output.
Read more

Axle load sensor

Axle load sensor is designed for axle load control and cargo weight control in vehicle tracking systems.
Read more

USB Smart Card Reader for Tachograph

Card reader device with USB interface which connects to PC server. It can read Company Card where BCE tacho application is installed.
Read more

RFID Driver Identification

Driver identification consists of 2 devices Key fob or card and Reader. Each driver has Key fob or card with unique id number. Once Key fob or card is swiped to reader, signal is send to GPS tracking device.
Read more

Panic Button

By integrating panic buttons with vehicle tracking, it is possible to receive an immediate notification that a device has been activated.
Read more

iButton Driver Identification

Driver identification consists of 2 devices Key and Reader. Each driver has iButton key with unique id number. Once key is connected to reader, signal is send to GPS tracking device. Identification ensures that a particular vehicle is driven by the designated driver himself.
Read more

Temperature Sensor

It is a low cost temperature sensor with a 1-wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative temperature.
Read more

Fuel Level Sensor

Fuel Level Sensor is installed into a fuel tank of a vehicle. The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device.
Read more

Fuel Flow Meter

Fuel meter enables to receive objective information about actual fuel consumption and vehicle working time.
Read more

sCAN - Contactless CANbus Reader

S-CAN is a contactless CAN-bus reader, allowing to retrieve data from various type vehicles without physical contact with vehicle wires, thus eliminating warranty issues.
Read more


12V and 24V relays are used for making remote engine block circuit.
Read more

Contact us

Connect with us and we will offer the most suitable solution according to your individual situation and needs. During workday our experts seek to answer as quickly as possible, but usually it can take up to 1 working day.