FMS500 Light

FMS500 Light applications:

Driver identification
Geofencing
Fuel level sensors
Temperature/humidity sensors
Overspeeding control
Track & trace
Ecodriving
Fuel flow meters
Remote output control
SDK - Unique scenarios & algorithms* (optional)

Certificates

Products manufactured by Xirgo Global have E-mark (E24) Certification and are sold in the markets of more than 20 European countries, Russia and CIS countries, Middle Eastern, African and South American countries. The company has implemented ISO 9001 certified production line.

General specification

Interfaces

1-Wire (iButton)

Inputs

4x digital (frequency, impulse counter, ON/OFF modes)
3x analogue, 11bit, 0-30V

Outputs

2x digital, (-)

Power supply

8 – 30V
Protection from overvoltage up to 150V
Consumption at 12V: active: <50mA, sleep: <8mA
Registration of power cut-off to device event log
Internal battery 1800mAh / 850mAh / 210mAh (optional)

Internal memory

8 МB, up to 150.000 entries

Accelerometer

Internal odometer

Operational temperature range

from -40 to +85C°

Dimensions

68x91x19mm

GSM

Internal antenna

GSM/GPRS class

10 (up to 85,6kbit), class B

Detection of GSM jamming

GNSS

Internal antenna

Sensitivity

-164 dBm

Acquisition

Cold <30s, hot 1s. A-GPS support

Available versions:

LTE Cat M 1/2G
GSM/EDGE Bands: 2, 3, 5, 8;
LTE BANDS: 1, 2, 3, 4, 5, 8, 18, 19, 20, 28;

LTE Cat 1/3G/2G
GSM/EDGE Bands: 3, 8;
WCDMA BANDS: 1, 8;
LTE BANDS: 1, 3, 7, 8, 20;

2G
GSM/EDGE Bands: 2, 3, 5, 8;

Optional

Waterproof (IP67) universal product case

Try BCE system demo version- for free!

Accessories

13.56MHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.

13.56MHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with Mifare 13.56MHz keys cards.

125kHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.

125kHz RFID key fob

Key fob is affordable proximity RFID key fob for using in access control systems.

125kHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with 125KHz key fobs and 125KHz cards.

Magnetic iButton key

iButton key devices are small, durably and easy to care. Magnet which is under the chip lets connect key to reader and it stays there all the time. It lets to make more scenarios for identification.

iButton key

iButton key devices are small, durably and easy to care. The iButton serial number is a rugged data carrier that serves as an electronic registration number for automatic identification.

ID Reader

The driver is expected to touch the iButton to the reader to start engine or identify himself. Reader can shine in RGB colors, LED is inside.

Concrete mixer rotation magnetic sensor

Magnetic Sensor adopts hall effect when the magnetic buttons go through the front end of the Magnetic Sensor, and thus causing the magnetic field changes.

Door sensor

Mechanical or magentic sensors are used to identify vehicle door open/close operations.

Seat sensor

A load cell (or loadcell) is a transducer which converts force into a measurable electrical output.

Axle load sensor

Axle load sensor is designed for axle load control and cargo weight control in vehicle tracking systems.

USB Smart Card Reader for Tachograph

Card reader device with USB interface which connects to PC server. It can read Company Card where BCE tacho application is installed.

RFID Driver Identification

Driver identification consists of 2 devices Key fob or card and Reader. Each driver has Key fob or card with unique id number. Once Key fob or card is swiped to reader, signal is send to GPS tracking device.

Panic Button

By integrating panic buttons with vehicle tracking, it is possible to receive an immediate notification that a device has been activated.

iButton Driver Identification

Driver identification consists of 2 devices Key and Reader. Each driver has iButton key with unique id number. Once key is connected to reader, signal is send to GPS tracking device. Identification ensures that a particular vehicle is driven by the designated driver himself.

Temperature Sensor

It is a low cost temperature sensor with a 1-wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative temperature.

Fuel Level Sensor

Fuel Level Sensor is installed into a fuel tank of a vehicle. The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device.

Fuel Flow Meter

Fuel meter enables to receive objective information about actual fuel consumption and vehicle working time.

sCAN - Contactless CANbus Reader

S-CAN is a contactless CAN-bus reader, allowing to retrieve data from various type vehicles without physical contact with vehicle wires, thus eliminating warranty issues.

Relay

12V and 24V relays are used for making remote engine block circuit.

Contact us

Connect with us and we will offer the most suitable solution according to your individual situation and needs. During workday our experts seek to answer as quickly as possible, but usually it can take up to 1 working day.